Parrot RKi8400 User's Guide download pdf (Page 6)

WARNING: Make sure you do not cut the cables while sliding the car stereo support and fitting the

car stereo into the dash board.

8. Attach the faceplate.

Note : To attach the faceplate, put it on the right side of the car stereo. Once the faceplate and the

car stereo magnets connect, press the left side.

Final check

Test

Once all the connections are made, turn the ignition on then off to perform the installation

test. The “Goodbye!” message must be displayed.

Action

If it is not the case, it is necessary to inverse the positions of the red and orange wires.

Indeed, the red wire of the power cable must be connected to the permanent 12V, the

orange wire to the 12V ignition and the black wire to the ground. This can be done simply

by reversing both fuse holders located on the Parrot wiring.

Installing the microphone

Selecting a

location

In order to get high-quality conversations, we advise you to respect the following

recommendations:

 Make sure the microphone is installed as close to the mouth of the user

as possible. The ideal distance is 60 cm. The best possible location for

the microphone is near the rear-view mirror.

 The microphone needs to be pointed towards the user.

1 2 3 4 5 6 7 8 9 10 11 ... 34 35

No comments

Parrot RKi8400 User's Guide Page 6